SheerStitch No Show Poly Mesh Embroidery BackingsĪllStitch's SheerStitch No Show Nylon Mesh Backing is a 1.5 oz sheer cutaway available in black, beige and white with a diagonal mesh. Be sure to face it so you can see both the edge of the design and the fabric while you are trimming.Buy Embroidery Supplies | Products | Newsletter | Embroidery Help | Contact To avoid nicking the fabric when trimming away the backing: Hold the backing while trimming and let the garment drape. A more crisp design may be obtain immediately and hold up for the life of the garment. Putting the Tear Away on the bottom helps with the hooping process in addition to added stability during the embroidery process. Trim the excess Cut Away backing with scissors. Tear off the excess Tear Away backing first. Embroider the design and remove the embroidered item from the hoop.
To hoop, place the E-Zee Tear ® Away backing down first, then sandwich the E-Zee Weblon No Show backing in between the garment on top and the Tear Away backing. Rounding the corners instead of leaving them square or pointed will avoid curling later on.Īdding a lightweight or medium Tear Away backing for added stability: Trim the excess backing with a sharp pair of scissors or shears, leaving approximately ¼” around the outside of the design. Hoop by placing the backing underneath the garment. Two pieces may be used for larger and more dense designs.Ĭut a piece from a roll or use a piece of pre-cut of E-Zee Weblon No Show to fit your hoop size. Use with high performance wear, knits and loosely woven fabrics. The low profile, sheer quality prevents the “badge effect” that is common when too heavy a stabilizer is used. Made of 100% embossed nylon, it is formaldehyde -free. is a low profile, soft, sheer Cut Away stabilizer that provides low visibility with lightweight fabrics.
0 kommentar(er)
